KOYO UCFA208-24 bearing units

A1:13 mm; Designation of bearing:US206-18G2; J:83 mm; A2:40 mm; L:108 mm; Recommended tightening torque for set screw:3.7 Nm; N:12mm; T max.:100 °C; Designation of housing:F206-; C:19.5 kN;

Inventory:0.0; r1s min:1.1 mm; Fatigue limit load, Cu:6.1 kN; Number of Rows of Rollers:Single Row; Width:0.748 Inch | 19 Mill; Noun:Bearing; rs min:1.1 mm; Da max:65.5 mm; Cage Material:Nylon;

L1:30 mm; Designation of housing:PA207N-; T min.:-20 °C; S:17.5 mm; C0:15.2 kN; N:M14; E:20 mm; Designation of bearing:UC207-21G2; Z:60 mm; Weight:1.56 kg;

A1:22 mm; G:M6x1; H1:130 mm; SW:4.76 mm; B1:71.3 mm; L3:95 mm; Weight:4.38 kg; T max.:200 °C; Designation of bearing:EX211-32G2T20; L:171 mm;

Min operating temperature, Tmin:-20 °C; ra max:0.3 mm; d:10 mm; Characteristic outer ring frequency, BPF0:3.61 Hz; Characteristic cage frequency, FTF:0.4 Hz; Static load, C0:1.27 kN; Characteristic rolling element frequency, BSF:4.84 Hz; Radial clearance class:CN; rs min:0.3 mm; Mass:0.009 kg;

B:37.6 mm; J:110 mm; T min.:-20 °C; A2:33.3 mm; B1:51.1 mm; d1:51.1 mm; N:11,5mm; A1:10 mm; A:21 mm; C:25.7 kN;

Designation of open end cover:SCO204-20; L:126.5 mm; Designation of bearing:UC204G2L3; d:20 mm; Recommended tightening torque for set screw:5.5 Nm; B:31 mm; N1:17 mm; J:94.5 mm; T min.:-20 °C; s1:15.5 mm;

s1:30.5 mm; N:11mm; J:97 mm; Designation of open end cover:SCOE204-15; Z:62.3 mm; S:17 mm; L1:40 mm; L:130 mm; Recommended tightening torque for set screw:5.5 Nm; C0:6.65 kN;

Designation of open end cover:SCOU205-14; A:30 mm; Dz:60 mm; T max.:100 °C; Designation of housing:FE205N-; Designation of bearing:UC205-14G2T04; B:34 mm; C:14 kN; J:70 mm; s1:17 mm;

T max.:100 °C; A:21 mm; G:R1/8"; s1:21.45 mm; B:42.9 mm; Weight:1.87 kg; L1:225 mm; SW:4 mm; Designation of bearing:UC207G2; C0:15.2 kN;

a:510 mm; oil level:50 mm; n:80 mm; v:45 mm; m:420 mm; b:165 mm; housing weight:72 kg; fixing bolts G:M24; g1:49 mm; d3:M110x2;

B1:77.7 mm; N:M16; L1:50 mm; Weight:4.9 kg; H1:25 mm; L:150 mm; H2:138 mm; T min.:-20 °C; J:105 mm; H:69.8 mm;

Precision class:P4; Db max:32.5 mm; a:8 mm; d1:22.65 mm; Radial rigidity:143 N/µm; D1:29.4 mm; Characteristic inner ring frequency, BPFI:8.24 Hz; f0:13.7; db min:19.5 mm; Min operating temperature, Tmin:-30 °C;

ra max:2 mm; db min:121 mm; Y2:3.15; D:200 mm; B:69.8 mm; b:10.5 mm; Characteristic inner ring frequency, BPFI:10.38 Hz; D1:175.8 mm; d2:130.2 mm; e:0.32;

L:127 mm; N:13mm; B:34 mm; J:95 mm; N1:19 mm; Recommended tightening torque for set screw:5.5 Nm; H:70 mm; Dz:54 mm; d1:32.4 mm; C:12.8 kN;